top of page

Foolishly Underestim Group

Public·14 members

Htc One X Stock Ruu Zip


This is a protection that HTC uses to ensure quality in their devices. To re-install their custom stock, you must re-lock your phone. To do this, place your phone into fast-boot mode and plugin in via USB:




Htc One X Stock Ruu Zip



We already brought to you the OTA and stock firmware files for the HTC One M8 device earlier for several variants including the USA carrier variants like Sprint HTC One M8, T-Mobile, Verizon, and AT&T along with the international unlocked version. However, now we have the stock full RUU stock firmware files for the devices HTC One M8S and HTC One M8 global variants for various regions like Europe, Asia-Pacific, and more. The list of RUU files are given below and the installation procedure is also listed.


It happens to all of us. Sometimes there comes a time when you need to unroot your HTC 10. Maybe you messed it up with flashing too many custom ROMS, maybe you just want to sell it, or maybe you need to return it to HTC for warranty? Regardless of the reasoning, unrooting the HTC 10 will get it back to stock and the way it was when it first came out of the box.


First, we need to restore the stock backup for the device by restoring it in the TWRP recovery. In order to do that we first need to make a backup in TWRP to setup the correct file structure so if you have never made a backup do the next section, if you have done one at some point in the past then you can skip it and do the next section.


Is there a other way to make my phone stock again (unroot)?I can receive the OTA update to android 7 but when I try to opened it go to the recovery mode. I try to follow yours steps but the only CID that match with my phone is the HTC__332 (TWRP Backup and OTA), I only miss the Stock Recovey to can do the TWRP Method.Is there a solution that I can do?


Hi DavidIve got a htc 10 from US, running something that resembles a stock htc, but it cant find updates.The question is about my cid, SPCS_001So i dont know how to find the correct RUU.How should i do?Many thanks


hi David!i have htc 10 and rooted with viper nougat version all features working properly sim card wifi all working fineand then leedroid update the rom oreo for htc 10 i am installed in it and the finger print not working which i think caues of frimware all things are working properly apart from finger print.but when am go to packup viper nouget rom then my phone sim card carrier not working and imei not showing.can u plz help me how to solve this problem and am from asia region.can i install stock ruu in htc can it possible to my simm card working..please guid me to solve this problem..


(bootloader) version-bootloader: 1.54.0000 : bootloader is 1.54 , so it will not work with revone tool to lock the bootloader again. we need bootloader 1.44 to Lock it completely.(bootloader) product: m7_u : the phone variation is m7u (GSM Only) and not m7ul (GSM & LTE). it is important when you want to choose the stock ROM.(bootloader) modelid: PN0712000 : PN0712000 is Google Play Edition model which is different from my phone stock. I need to revert it back to original before I can flash the stock ROM.(bootloader) cidnum: GOOGL001 : GOOGL001 is Google Play Edition custom id which is different from my phone stock. I need to revert it back to original before I can flash the stock ROM.(bootloader) security: off : my phone is in s-off state. I need to make it s-on.


After changing the modelid reboot into bootloader and confirm it has been changed properly.Fortunately changing cid is much easier and can be done through a single command in boot-loader mode (change YOURCID to your stock cid value) :


Note : CID is also dependent on the region and your phone carrier, if you dont know your stock cid, your best bet is to search on forums like xda-developers where many users around the world have shared their modelid and cid and carrier names.After changing the cid reboot into bootloader and confirm it has been changed properly.Now that we have proper mid and cid, we can relock bootloader and flash stock ROM. in order to relock bootloader issue the following command while you are in bootloader mode :


It is important to issue the command twice because first time it updates the bootloader and reboots into RUU mode again ready for ROM to be flashed.If you have done every step correctly , your stock ROM should be flashed into your device now and you can see the progress on screen.When flashing is over and you get a success message , it is time to reboot the device :


Your phone should boot into stock ROM now. it may take a while as this is like the first boot of the phone. but there is still two steps to be done :1. Locking bootloader (it is in Relocked state now)2. Turning Security ON (S-ON)In order to Lock the bootloader like original we will use a tool called revone.Please read this guide on how to use revone to Lock your bootloader : -developers.com/showthread.php?t=2497712Note 1 : Revone will not work on hboot 1.54 or above, if by any chance you have boot-loader 1.54 or higher, you need to downgrade your hboot to version 1.44.Note 2 : You may need to run revone more than once to work. for me personally it took two tries to get a success message.After you got a success massage from revone , reboot back into bootloader and make sure your bootloader is in Locked state.The last step is to turn the security on, it is very easy, just run the following command in bootloader :


  • Get Link (adsbygoogle = window.adsbygoogle []).push();How to Flash or Install Firmware (ROM)Download and extract the HDC ONE X S720e stock firmware package on the computer.

  • After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver, and How-to Flash Guide.

  • Install the provided USB Driver on the computer (if the USB Driver is already installed, then SKIP this step).

  • Follow the How-to Flash Manual to Flash or install the Firmware on your HDC ONE X S720e device.

Follow Complete TutorialReadme Once:


AT&T users are urged to update to firmware 5.18.502.1 (HBOOT 2.18); there are firmware update instructions on the installation page for evita. Non-AT&T users should update to the latest firmware via RUU or simply by installing stock and taking OTA(s).


AT&T users are urged to update to firmware 5.18.502.1 (HBOOT 2.18); there are firmware update instructions on the installation page for evita. Non-AT&T users should update to the latest firmware via RUU or simply by installing stock and taking OTA(s). 350c69d7ab


https://soundcloud.com/zathuyoskaj/why-is-my-software-not-installing

About

Welcome to the group! You can connect with other members, ge...
bottom of page